(A) Firstly user must run the CMOS set-up for the auto detection of CD-ROM drive. If it is 'ok', then user should copy the "MSCDEXE.EXE" file from c:\WINDOWS\COMMAND> to c:\>. (It's not that all the BIOS detect CD-ROM at 'Auto Detection'.)
(B) The slave jumper is not detected by the WINDOWS default driver of CD-ROM for which the WINDOWS driver can be installed from CD-ROM driver for WINDOWS. Driver is installed by user which is comming with CD-ROM driver.
CD-ROM Drive
(C) User can also check the new hardware wizard from control panel for detection of CD-ROM controler.
(D) The IRQ No. Range (reserved - 12/13/14/15) from power management set-up can be altered for accessing of CD-ROM under WINDOWS.
No comments:
Post a Comment